Watch Repair Deluxe Watch Tool Set

These tools will allow you to open most any type of watch and service things like; replacing watch gaskets, replacing watch battery, replacing watch crystal, replacing watch crown, replacing watch movement, sizing watch band, replacing watch band, replacing or adjusting watch band clasp, fitting watch hands, removing watch band links, and more.

• Jaxa-Type Case Opener - excellent for opening waterproof cases up to 34mm
• Case Knife - for opening any dust proof case
• Pin Pusher - for removing links from bands
• 2.00mm Screwdriver - the second most needed screwdriver for watchmakers
• 1.00mm Screwdriver - the first most needed screwdriver for watchmakers
• 1.40mm Screwdriver - the third most needed screwdriver for watchmakers
• Plastic Tweezers - for those very special batteries such as extra thin lithium
• Brass Tweezers - ideal for replacing watch hands; soft enough to avoid scratching
• AA, Anti-Mag Tweezers - suitable for assembly work, has beveled edge
• 5(sa), Anti-Mag Tweezers - same as double A
• Flat Nose Pliers
• Buff Stick
• Ball Peen Hammer - ideal for removing pins and riveting
• Polishing Cloth - helps remove any marks from watches and jewelry
• 100-Spring Bars- for replacing missing or damaged bars in a watch
• Hand-Remover - takes the guessing out of removing hands from watches
• Pin Punch - .80mm - for removing cotter pins and Movado® type pins from watches
• Pin Punch- 1.0mm - same as punch .80 - for removing stronger, larger or rusty pins
• Pin Vise - excellent for watch stems, ideal for using a small drill bit or small broaches
• Hand Press
• Fiberglass Brush - removes rust and dirt from metal surfaces and polishes
• Spring Bar Tool - for removing hard to reach watch pins
• Eye Loupe
• Band Holding Block
• Silicone Grease - a must - helps to reseal cases after changing batteries, helps keep moisture out use it always in the gasket and around the watch crown
• Case Cushion
• Product case size (closed): 12.9" X 8.2" X 2.5" inches (307 X 207 X 62mm)